Posts Tagged ‘ 40D ’

5x5xMonday

In recent discussions with a friend, we challenged each other. I had to take at least 5 pictures every day by Monday and self-edit down to my choice of the best 5. Hence 5 by 5 by Monday or 5x5xMonday. His challenge was to draw 5 sketches per day and cull to the 5 best for Monday. There was also a loose theme of fun (maybe it was funny; I don’t remember though).

Here are my 5. They’re all centered around kids, as that’s a major part of my life right now. Plus, who best do define “fun?”

_MG_5374
Here I come!

_MG_5393 - Version 2
Not Happy!

_MG_5450
Spinning

_MG_5485
Fighting Gravity

_MG_5491
Spinning with Ceila

Technorati Tags: , , , , , , , , ,

Keyboard Reflections

IMG_20090317_11899.jpg
Keyboard reflections
IMG_20090317_11897.jpg
Keyboard reflections, alternate

Technorati Tags: , , , , , ,

ADC response of a Canon 40D

This past Thursday I upgraded my camera. I had been shooting with a Canon Digital Rebel XT for the past two years, and while it’s served me well, I had an itch and decided to get the 40D.

While I was cruising around the web, drooling at different cameras, I ran into a web page (I can’t remember how I got there) that suggested a method to determine (in a somewhat crude fashion) the dynamic range of the sensor in a digital SLR.

The technique suggested is really simple. Using your fastest lens, take a picture of a neutral subject (white, grey, etc). Keep the aperture at wide open and set the shutter speed such that you are exposed as bright as possible without an overexposure warning. Then, keeping the same shutter speed, stop down by full stops. The histograms will show where the camera is digitizing the luminosity info from the sensor.

I did this for my new camera and found the results rather interesting. Note that the “highlight tone priority” was turned off, and ISO 100 was used for all exposures.

composite_exposures_v2.jpg

Composite histogram for exposures with an aperture ranging from f/32 to f/2.8

The sensor / ADC is not linear.

If it were linear, then you would see (within whatever standard deviation) a histogram value step down by half for every stop of down of the aperture.

The histogram counts for the given aperture values:
(F-stop :: Histogram Median)

f/32  :: 7
f/22  :: 15
f/16  :: 31
f/11  :: 55
f/8   :: 109
f/5.6 :: 153
f/4.0 :: 206
f/2.8 :: 241

While the first few lower entries appear to be linear, the higher values are decidedly not.

Using Excel, I plotted the median values and then did a trend line to approximate the type of curve that would best fit these results.

Picture 1.png

Curve fit of the observed histogram median results

While the curve fit shows a power based curve seems to fit, it sort of appears to be two different linear lines to me. But, it’s hard to say just looking at it.

Certainly from a technical standpoint, there’s no reason why the ADC has to be linear. While most are linear, having programmable reference levels wouldn’t be that hard to do.

My conclusion: I’m not sure. I believe that the composite histogram itself is telling. The “Expose To The Right” idea does not seem to be correct. The original idea was that the linear ADC (sensor + ADC, of course) would mean that after the highlights, you would immediately lose half the information. The histogram seems to say otherwise.

Does this mean that the end results from the ETTR are bunk? Probably not. But, it does seem to indicate that there isn’t nearly as much to be gained from the approach of controlled over-exposure.

Though I have not collated results for the “highlight tone priority,” I can say that there seems to be a shifting of the “sample points” from these results.

Technorati Tags:
, , , , , , , ,